Reverse Osmosis System GS-2000

Name: Reverse Osmosis System GS-2000 — 2000 LPH RO | Xinrui Technology
Brand: Xinrui Technology
SKU: GS-2000

Model GS-2000

Reverse osmosis system GS-2000, 2000 LPH (2 T/H), ≥99.5% desalination, 50–70% recovery, 3 kW. SUS304 frame, ISO9001/CE. Specifications and quotation.

Request a Quote Contact Us

Technical Specifications

Capacity	2000 LPH (2 T/H)
Power	3 kW
Voltage	220V/380V/460V, 50/60Hz
Recovery rate	50–70%
Desalination rate	≥99.5%
Operating pressure	0.8–1.2 MPa
Max feed TDS	2000–2500 ppm
Membrane	4040 × 8, TFC (FilmTec/Hydranautics/Vontron)
Frame	SUS304
Certification	ISO9001, CE

Parameters are reference values — confirm final specification with our engineering team before ordering.

Key Features

✓High-rejection TFC membrane for low-TDS output

✓Skid-mounted, ready to install

✓Auto flush & TDS display control panel

✓Sand + carbon + micron pre-filtration included

Typical Applications

Industrial process waterBeverage & bottlingFood processingPharmaceutical & boiler feed

Frequently Asked Questions

What pretreatment does an RO system need?

Upstream sand filter, activated carbon filter and micron filter protect the membranes from scaling and chlorine. A water analysis before installation determines the exact pretreatment.

Can it produce drinking water?

Yes for process and general use; for direct potable supply we add UV/ozone post-disinfection and a polishing stage per local standards.

What is the lead time for the GS-2000?

Skid-mounted units like the GS-2000 (2000 LPH (2 T/H)) are typically shipped 20-30 working days after the water analysis is confirmed. Larger engineered systems follow a project schedule agreed in the contract.

What feed water does the GS-2000 need?

GS-2000 is designed for a feed of . A recent water analysis report lets us size the pretreatment correctly – that is the single most important factor for membrane and resin life. The system is built to ISO9001, CE.

What consumables and maintenance does the GS-2000 require?

Routine work is limited to checking dosing/brine levels, logging pressure and conductivity, and replacing prefilters. Membranes and resin are long-life consumables; we publish expected replacement intervals in the manual and supply spares from stock. The system is built to ISO9001, CE.

Is the GS-2000 certified and tested before shipment?

Yes. Every unit is wet-tested in our workshop before packing, and the frame and components follow ISO9001, CE. You receive the factory test report with the shipping documents.