Sea Water Desalination GS-SW1000

Name: Sea Water Desalination GS-SW1000 — 1000 LPH | Xinrui Technology
Brand: Xinrui Technology
SKU: GS-SW1000

Model GS-SW1000

Sea water desalination GS-SW1000, 1000 LPH, SWRO membrane, 4.5–6.5 MPa. For coastal, islands and ships. Specifications and quotation.

Request a Quote Contact Us

Technical Specifications

Capacity	1000 LPH
Membrane	Sea-water RO (SWRO), high rejection
Operating pressure	4.5–6.5 MPa
Power	4.0 kW (high-pressure pump)
Voltage	380V/460V, 50/60Hz
Recovery rate	30–45%
Desalination rate	≥99%
Frame	SUS316L / coated marine grade
Certification	ISO9001, CE

Parameters are reference values — confirm final specification with our engineering team before ordering.

Key Features

✓High-rejection SWRO membranes

✓Marine-grade corrosion-resistant frame

✓Energy-recovery option to cut power cost

✓Containerized skid for remote sites

Typical Applications

Coastal & island communitiesShips & offshore platformsResorts & hotelsEmergency & relief water

Frequently Asked Questions

Why does seawater RO need higher pressure?

Seawater has very high osmotic pressure (TDS ~35,000 ppm), so the high-pressure pump must reach 4.5–6.5 MPa to push water through the membrane — much higher than brackish or tap-water RO.

Can it run on a ship or island?

Yes. We offer marine-grade frames, generator-compatible voltage and containerized skids for offshore, island and vessel installation.

What is the lead time for the GS-SW1000?

Skid-mounted units like the GS-SW1000 (1000 LPH) are typically shipped 20-30 working days after the water analysis is confirmed. Larger engineered systems follow a project schedule agreed in the contract.

What feed water does the GS-SW1000 need?

GS-SW1000 is designed for a feed of . A recent water analysis report lets us size the pretreatment correctly – that is the single most important factor for membrane and resin life. The system is built to ISO9001, CE.

What consumables and maintenance does the GS-SW1000 require?

Routine work is limited to checking dosing/brine levels, logging pressure and conductivity, and replacing prefilters. Membranes and resin are long-life consumables; we publish expected replacement intervals in the manual and supply spares from stock. The system is built to ISO9001, CE.

Is the GS-SW1000 certified and tested before shipment?

Yes. Every unit is wet-tested in our workshop before packing, and the frame and components follow ISO9001, CE. You receive the factory test report with the shipping documents.